Tanie Militaria talks about the selling points of the MP5SD6 CM.041 BLUE Limited Edition AEG made by CYMA... "The CM.041 SD6 replica is the next milestone in the production of ASG replicas by Chinese manufacturers. It surprises with amazing accuracy of workmanship. The halves of the body fit very well, there is no play. The material that was used for the production of the replica is metal (body, outer barrel, sights, flash hider, stock arms - ZnAl). The butt plate and the pistol grip are very carefully made, the material from which they are made is nylon (the same material as used to produce parts in real weapons).

WARNING! The replica has a unique serial number!

The reloading handle reveals the hop-up regulation. Contrary to the previous designs of the MP5 replica, this one just needs to knock out a two pin to disassemble the replica into two parts and get to the hop-up chamber and the inner barrel, which makes it very easy to replace the hop-up rubber or the barrel (note! disconnect the wiring plug!). However, in the 041 replicas there is no need to replace the barrel or the HU bucking, because the barrel is brass with an internal diameter of 6.03 mm and the bucking does not differ in quality from the HU bucking used by renowned companies such as CA, G&P or G&G.

Inside, a reinforced ver.2 mechanism is used, steel gears are mounted on reinforced 7mm bearings, which tension a 120m / s spring giving a firing force of about 400 FPS.

The polymer piston has metal teeth and the cylinder - type '1' - has been coated with black nickel "SMOKED" on a copper base, ensuring perfect surface smoothness.
A great advantage is the silent set of piston heads and cylinder, made of aluminum and covered with a blue anode, and the piston head itself has a bearing.

The spring guide is reinforced (metal) with bearings (note: v.3 guides are used), which makes the spring work easier.

The replica has a powerful motor with increased torque, equipped with neodymium magnets.

The working culture of the mechanism will surprise many users. It is also worth adding that the model is fully compatible with parts and accessories from other manufacturers, which is important for all kinds of reinforcements.

Every AEG goes through a zero review! It is checked and shot on the XCORTECH X3200 chronometer.

WARNING! We provide a start-up warranty only for the battery and charger supplied by the manufacturer. Please be advised that the battery included in the set does not guarantee long and effective operation of the replica mechanism."