Next up on the Valken Gear Guide is the Alloy MK I AEG from their Alloy Series... "The Valken Tactical Alloy Series Mk.I is our CQB M4 variant in our new premier line of full metal AEG rifles. The durable high quality aluminum alloy bodies are milled to finish and hard coated to create a tough exterior, combined with a mil spec CNC'd free floating rail system, and a 1 piece metal lightweight outer barrel. Inside is a Ver. 2.1 Gearbox, with a micro switch trigger system designed and tested with 11.1v LiPo's that presents a solid trigger break and reset for fast response. The gearbox also features a quick change spring guide, and a low resistance steel wire harness that clearly indicates positive from negative. The inner barrel assembly is a 70D full seal bucking, polymer hop up unit with precise adjustment, and carbon steel barrel the MK.I's aim is true.

Gearbox Specs:

• High speed motor
• Micro switch trigger system
• SHS 18:1 ratio gears
• Steel 8mm bushing on sector and spur gear, 8mm bearing on bevel gear
• Brass type 1 cylinder
• Polymer cylinder head
• Even distribution nozzle
• Reinforced tappet plate
• Ported piston head
• Full metal tooth rack piston, 2nd tooth removed
• Quick change spring guide
• Metal selector plate
• 1-piece hop-up
• Function bolt catch/dust cover
• Steel 6.03mm inner barrel (200mm)
• Low resistance steel wire
• Mini type Tamyia connectors

External Specs:

• Aluminum Alloy receiver 'Matte Black'
• Free floating metal CNC 7in.  Key Mod Rail
• HDP 6 position crane stock
• HDP flip up dual profile front & rear sight
• 6in. metal outer barrel 14mm CCW 'left hand' thread
• 2.5in. Metal Compensator
• Metal Mil-Spec buffer tube
• Metal rear sling mount
• Vented motor plate
• FPS 350-370 w/.20g Valken Precision BB"