AAP-01 Nozzle Spring Misfeed Fix With Hadron AAP-01 Short Stroke Bouncer Kit

OptimusPrime

Angry Bull uses the Hadron AAP-01 Short stroke bouncer kit to fix the misfeed issues with the GBB pistol. The AAP-01 Short stroke kit, or the “Bouncer”, is a set of parts that improves the feeding consistency and reduces the shock of the bolt. It comes with a Hadron Designs specific 300% upgraded spring, which works well with most buckings, and a shortstroke segment made of a bouncy material that absorbs and rebounds the bolt impact.

AAP-01 Airtac Drum Magazine Conversion

OptimusPrime

Hadron Airsoft Designs show the AAP-01 Airtac Drum Magazine Conversion and talk about Airtac's magazine adapters... "AAP-01 Airtac Drum Magazine ConversionThe Airtac is a brand of airsoft magazine adapters that allows users to convert their airsoft magazines to fit different types of rifs. These adapters are made with high quality materials and are designed to ensure a precise fit with minimal wobbling or rattling.

SRU APX-01 With Hadron Airsoft Designs LOKI TDC Unit

OptimusPrime

Hadron Airsoft Designs put together the SRU APX-01 Kit and installing their LOKI TDC Unit... "Here we unbox, review and assemble the SRU APX-01 Carbine kit. During the assembly we install the LOKI AAP TDC hop unit, and drill the carbine kit upper.

Its a long video, (apologies) with quite a few details to cover. I have tried not to cut much out, and there was no practice run. I find trimming videos down, can sometimes loose the lessons that are learned.

Installing The Hadron "Loki" TDC Hop-Up Unit For AAP-01

OptimusPrime

Video from Hadron Airsoft Designs showing how to install the "Loki" TDC hop unit on the Action Army AAP-01 Gas Blowback Pistol... "In this video, we cover the full installation of the "Loki" TDC hop unit, into the Action Army AAP-01 airsoft pew pew.

We used the stock barrel, with a 'Snipermechanics' Flamingo 60 degree.

It's a simple procedure, using minimal tools. Enjoy the 0.2 to 0.5 bb lifting capability, with incredible long range accuracy.

Action Army AAP-01 With Hadron LOKI Hop-Unit

OptimusPrime

Silly Ghillie is all happy with his Action Army AAP-01 GBB Pistol with a CCK after installing the LOKI hop unit from Hadron Airsoft Designs... "Today I'm using the new LOKI hop unit by Hadron airsoft designs. The Hop unit allows for a  easy instal TDC and perfectly centres the barrel and bucking to produce good range and accuracy. I'm also using a Flamingo hop rubber and a S+TNT 129mm barrel.

Installing The Hadron Airsoft Designs G17/G18 TDC Outer Barrel

OptimusPrime

Hadron Airsoft Designs shows how to install their G17/G18 TDC Outer Barrel. This is now available to order from their store online... "We took the expertise and knowledge from the design and manufacture of the Mk23 TDC series, and applied this to the Glock G17 and 18. This gave numerous engineering challenges. After 18 months of testing and changes, development and feedback. We have a game changer.

Wolverine Airsoft MTW-9 Scorpion EVO High Capacity Magazine Hack

OptimusPrime

Hadron Airsoft Designs show how they are able to fit the ASG Scorpion EVO Hicap magazine to the new Wolverine Airsoft MTW-9... "I have always had ASG Evo magazines kicking about.. so, I took one, well two for the team. The measurements are very easy. Takes around 10 minutes a mag. Now I have gone from 75 bb capacity to 375 bb!!

Very simple modification allows ASG High Capacity mags to be used on the @Wolverine Airsoft MTW-9 RIF.

Hadron Airsoft Designs On The Wolverine Airsoft MTW-9

OptimusPrime

Hadron Airsoft Designs takes a hard look at the new Wolverine Airsoft MTW-9, the next complete HPA-powered airsoft gun from Wolverine Airsoft... "Welcome to a video recorded during a Facebook live stream. We open the latest offering from Wolverine Airsoft, the MTW-9. We had a few tech gremlins during the broadcast, but it worked. A great learning curve.

Gorilla FCU Wolverine MTW Inferno 2 Install

OptimusPrime

Hadron Airsoft Designs shows how they installed the Gorilla Airsoft FCU intto a Wolverine Airsoft MTW Inferno 2... "No practice runs here, we install the Gorilla Airsoft FCU for the Wolverine MTW Inferno 2 edition. What you see, is the self learning of the method. The next one we do, will be much quicker. That's how it goes.:)

Had one or two things to learn during this board swap.

The Latest News

Feature Story

Airsoft Guns and Gear Reviews