ScarFab94 reviews the xForce XFR032 Red Dot Bundle Sight that can be ordered from Begadi. Full description here is from the retailer... "The xFORCE XR032 / XTSW is a red dot sight with a dot reticle. The housing was made from 6061-T6 CNC and is splash-proof. (Can also be used in the rain) The reticle is shockproof and can also be used on GBBs. The obliquely installed lens prevents reflections from, for example, solar radiation or other light sources.

12 levels of brightness are available. The reticle is clear and the dot is not blurry. The battery compartment has been improved and is not held in place with a fine thread, but with 4 screws.

The reticle can be adjusted quickly and easily with the tool on the right-hand side. The tool is held in position by two magnets.

A kill flash is already included in the scope of delivery, which protects the lens from damage and dirt. This can be unscrewed in the event of a defect or if you don't like it.

Technical data:

• Illumination color: red
• Brightness levels: 12
• Length: approx. 77mm
• Weight: 185g
• Material: Aluminum
• Surface: matt
• Battery: CR2032
• Mounting: Picatinny 21mm Eye relief
• Parallax: 50 YDS Diopter
• adjustment: fixed
• Reticle: dot (3 MOA)
• waterproofing : IPX7

Special features:

• Outer housing made of 6061 aluminum
• Angled built-in lens prevents reflections from light sources (e.g. solar radiation)
• low power consumption
• sharp image
• 12 brightness settings
• lens diameter 20mm
• also for GBBs with high recoil
• killflash included
• QD riser and flat mount are included

Mounts:

QD riser mount: A standard QD clamp mount made of aluminum is included in the scope of delivery. The line of sight is increased by 30mm. It would also be possible to rotate the visor by 180° on the mount. The mount is designed for 20 - 21mm rails. If the assembly is not stuck in your case, simply tighten the nut on the side with a 10mm open-end wrench.

Flat mount: As the name suggests, this is a low mount that is mostly used on SMGs or as an add-on for a scope. An Allen key is required for assembly, which is included in the scope of delivery."